Cpu Configuration - Asus P5N7A-VM Hardware User Manual

2.4.1

CPU Configuration

The items in this menu show the CPU-related information that the BIOS
automatically detects.
Advanced
Configure advanced CPU settings
Module Versin:3F.0E
Manufacturer:Intel
Brand String:Intel(R) Core(TM)2 CPU 6300 @ 1.86 GHz
Frequency :1.86GHz
FSB Speed :1067 MHz
Cache L1 :64 KB
Cache L2 :2048 KB
Ratio Status:Unlocked (Min:06, Max:07)
Ratio Actual Value
CPUID :6F2
Ratio CMOS Setting
C1E Support
Max CPUID Value Limit:
Intel(R) Virtualization Tech
CPU TM Function:
Execute-Disable Bit Capability
Intel(R) SpeedStep(TM) Tech
v02.61 (C)Copyright 1985-2007, American Megatrends, Inc.
Ratio CMOS Setting [Auto]
Allows you to set the ratio between CPU core clock and the FSB frequency.
Configuration options: [Auto]
If an invalid ratio is set in CMOS, the actual value may be different from the set
value.
C1E Support [Enabled]
Allows you to enable or disable Inter CPU Enhanced Halt (C1E) function, a CPU
power-saving function in system halt state. When enable, the CPU core frequency
and voltage will be reduced during the system halt state to decrease power
consumption. Configuration options: [Disabled] [Enabled]
Max CPUID Value Limit [Disabled]
Allows you to determine whether to limit CPUID maximum value. Set this item to
[Disabled] for Windows XP operating system; set this item to [Enabled] for legacy
operating system such as Windows NT4.0. (Default: Disabled)
Configuration options: [Disabled] [Enabled]
Intel(R) Virtualization Tech [Enabled]
Allows you to enables or disables Intel
enhanced by Intel
®
operating systems and applications in independent partitons. With virtualization,
one computer system can function as multiple virtual systems.
Configuration options: [Enabled] [Disabled]
ASUS P5N7A-VM
BIOS SETUP UTILITY
:7
[Auto]
[Enabled]
[Disabled]
[Enabled]
[Enabled]
[Enabled]
[Enabled]
Virtualization Technology allows a platform to run multiple
Virtualization Technology. Virtualization
®
Sets the ratio between
CPU Core Clock and the
FSB Frequency.
NOTE: If an invalid
ratio is set in CMOS
then actual and
setpoint values may
differ.
Select Screen
Select Item
+- Change Option
F1 General Help
F10 Save and Exit
ESC Exit
2-19