Before You Proceed - Asus P5N32-E SLI Hardware User Manual

2.1

Before you proceed

Take note of the following precautions before you install motherboard components
or change any motherboard settings.
• Use a grounded wrist strap or touch a safely grounded object or to
a metal object, such as the power supply case, before handling
components to avoid damaging them due to static electricity.
• Hold components by the edges to avoid touching the ICs on them.
• Whenever you uninstall any component, place it on a grounded
antistatic pad or in the bag that came with the component.
Onboard LED
The motherboard comes with a standby power LED. The green LED lights up
to indicate that the system is ON, in sleep mode, or in soft-off mode. This is a
reminder that you should shut down the system and unplug the power cable before
removing or plugging in any motherboard component. The illustration below shows
the location of the onboard LED.
P5N32-E SLI Plus
P5N32-E SLI Plus Onboard LED
ASUS P5N32-E SLI Plus
®
SB_PWR
ON
OFF
Standby Powered
Power Off
2-1