Asus P5N32-E SLI Hardware User Manual page 144

Make sure to re-enter your NVRAID settings after the CMOS is cleared;
otherwise, the system will not recognize your RAID setup.
•
•
Entering the NVIDIA
To enter the NVIDIA
1. Boot up your computer.
2. During POST, press <F10> to display the main menu of the utility.
The RAID BIOS setup screens shown in this section are for reference only, and
may not exactly match the items on your screen.
RAID Mode:
Free Disks
Loc
1.0.M
1.1.M
2.0.M
2.1.M
[F6] Back
At the bottom of the screen are the navigation keys. These keys allow you to move
through and select menu options.
5-28
For detailed descriptions on the NVIDIA
"NVIDIA RAID User Guide" found in your motherboard Support DVD.
®
When using Windows
Windows 2000 Service Pack 4 or later version.
®
RAID utility
®
RAID utility:
®
NVIDIA RAID Utility
- Define a New Array -
Striping
Disk Model Name
XXXXXXXXXXXXXXXXXX
XXXXXXXXXXXXXXXXXX
XXXXXXXXXXXXXXXXXX
XXXXXXXXXXXXXXXXXX
[F7] Finish [TAB] Navigate
RAID configuration, refer to the
®
2000 operating system, make sure to install the
®
Oct 5 2004
Striping Block:
Array Disks
Loc Disk Model Name
[→] Add
[←] Del
[↑↓] Select
Optimal
[ENTER] Popup
Chapter 5: Software support