Updating The Tv Firmware; Customizing Tv Settings - Insignia NS-19D220NA16 User Manual

Updating the TV firmware

If your TV is behaving oddly and you have tried all the
solutions in the troubleshooting pages, you may need
to update the TV firmware.
Cautions
• Make sure that you have tried all other
solutions before you upgrade the
firmware.
• While the firmware is updating, do not
turn off your TV.
Note
To update the TV firmware, you need a:
• Computer with an available USB port
• High-speed Internet connection
• USB flash drive
1 On the Help menu, select System Info, then write
down your model, revision, and firmware
information. See
page 62.
2 On a computer, go to www.insigniaproducts.com,
then click Support & Service. Enter
NS-19D220NA16 or NS-19D220MX16 in the box
under Manual, Firmware, Drivers & Product
Information, then click .
3 Follow the instructions in the Firmware Installation
Guide on the Insignia website to download the
firmware update and copy it to a USB flash drive.
4 Plug the USB flash drive into the USB port on the
side of your TV.
5 Press MENU.
6 Press or to highlight HELP, then press
ENTER.
7 Press or to highlight Update Firmware, then
press ENTER or . A message asks if you want to
update the TV firmware.
8 Highlight OK, then press ENTER.
While your TV installs the firmware update, your
TV displays a status screen. Do not turn off your
TV until the update is complete.
63
Viewing system information
www.insigniaproducts.com
9 When the update is complete, unplug the USB
flash drive, then press ENTER. Your TV turns off
then on to complete the update.
10 If the channel list has been deleted, you need to
scan for channels. For more information, see
Automatically scanning for channels

Customizing TV settings

If you did not complete the customization part of the
Easy Setup wizard the first time you turned on your TV,
on
you can run the wizard again to customize settings.
When you run the Easy Setup wizard, your TV will not
reset any changes you made on the Picture, Audio,
Channels, or Settings menu. The wizard scans for
channels and replaces the channel information stored
on your TV.
1 Press MENU.
2 Press
ENTER.
or
3 Press
press ENTER or . A message asks if you want to
run the Easy Setup wizard.
4 Press
not reset), then press ENTER.
If you select OK, your TV turns off, then turns on
again. The Easy Setup wizard opens. Go through
the Easy Setup wizard. For more information, see
Turning on your TV for the first time
OR
If you select Cancel or press MENU, your TV
returns to the Help menu without making any
changes. If you press EXIT, the on-screen menu
closes without making any changes.
Insignia 19" 720p 60Hz LED TV
Note
• If you see a message that says the
firmware file is incorrect, make sure
that you have downloaded the correct
file for your model.
• If you see a message that says the
update failed or the TV screen is blank
and the power LED is blinking red
then blue, turn off your TV, turn it back
on, then run the upgrade again.
or to highlight HELP, then press
or to highlight Customize my TV, then
or to select OK (to reset) or Cancel (to
on page 48.
or
on page 33.