Table of Contents
Advertisement
Installing
Bat!~ries
in the Remote ._C_o_n_tr_o_1
._;::::==========--=::....;
1.
Lift
the cover at the back of the remote control upward as shown in the figure.
2.
Install two AAA size batteries.
:- Make sure to match the
"+"
and "-" ends of the batteries with the diagram inside the
compartment.
3.
Replace the cover
-
Remove the batteries and store them In a cool, dry place if you won't be using the
remote control for a long time.
The remote control can be used up to about 23 feet from the TV
(Assuming typical TV usage, the batteries should last for about one year.)
-
USing the remote control with the
ITJ
ON/OFF light button set to On will reduce the
battery usage time
:-
If the remote control doesn't work, check the following:
1. Is the TV power on?
2. Are the plus and minus ends of the batteries reversed?
3. Are the batteries drained?
4. Is there a power outage or is the power cord unplugged?
5. Is there a special fluorescent light or neon sign nearby?
-----
--
.~
-b,
----L
(1'
(!""":
0
i
'_"'"
-.....
'" p..:
-------_._,
~~,~::,~e:~: i~:~~~":i~9~~:~~~~~~~~~:~b~~~~~h~
; e m Ol e wn l c o l bol t o n,
cI~a,'y
---.-- .- -
11.
Press the
ITJ
ON/OFF light button
-
Pressing the
GJ
ON/OFF light button toggles between ON and OFF
:-
When ON, the button backlight is turned on for a moment.
:-
Pressing a remote control button when the remote control is on turns the button backlight on for a moment. If
you touch or move the remote control and the motion is detected by the sensor of the remote control, the button
backlight will be turned on for a moment.
Since there is a vibrating device inside the remote control, shaking the remote control will result in a sound
generated by the device.
The button backlight will not be turned on when the remote control is turned off.
Engll.h- IS
Advertisement
Table of Contents
Troubleshooting
