Setting Up Anynet - Samsung 950 User Manual

t
~_~t!ing~_~~~~_~t~ __ -- ------- - _. ------ ---
The following settings help set the Anynet+ functions
To use the Anynet+ Function, Anynet+ (HDMI-CEC) must be set to On
1. Press the MENU button Press the'" or ... button to select "Application",
then press the ENTER G' button.
2. Press the'" or ... button to select "Anynet+ (HDMI-CEC)", then press the
ENTER G' button
3. Press the'" or button to select "Setup", then press the ENTER G' button.
4. Press the'" or button to select "Anynet+ (HDMI-CEC)", then press the
ENTER G' button
5.
Press the'" or ... button to select "On", then press the ENTER G' button.
- The "Anynet+ (HDMI-CEC)" function is enabled.
If you select Off. "Anynet+ (HDMI-CEC)" is disabled .
. - When the "Anynet+ (HDMI-CEC)" function is disabled, all the Anynet+
related operations are deactivated.
Setting an Anynet+ Device to turn Off Automatically when the TV is Turned Off
1. Press the'" or ... button to select "Auto Turn Off', then press the ENTER G'
button
2. Press the'" or ... button to select "Yes", then press the ENTER G' button.
-.. The "Auto Turn Off' function is enabled
- If you select "No". the "Auto Turn Off' function is canceled.
Press the EXIT button to exit
The active source on the TV remote must be set to TV to use the Anynet+
function
If you set "Auto Turn Off' to "Yes", connected external devices are also turned
off when the TV is turned off If an external device is still recording. it mayor
may not turn off
Easy Setting
1. Press the TOOLS button on the remote control.
2. Press the ENTER [3' button to select "Anynet+ (HDMI-CEC)"
- The Anynet+ (HDMI-CEC) menus appear on the screen.
English. 132