Wireless Network Setup - Samsung 950 User Manual

I
Wireless Network Setup
"". The menu is activated only if the Samsung Infolink Wireless adapter is connected (See page 120)
Auto Setup
"". If you connect the LAN cable and it supports DHCP, the Internet Protocol (IP)
Settings are automatically configured.
"" The wireless IP sharer to be connected to this product must support DHCP.
1.
Press the MENU button to display the menu.
Press the. or 'Y button to select "Setup", then press the ENTER G button.
2. Press the. or 'Y button to select "Wireless Network Setup", then press the
ENTER G button.
3. Press the ENTER G button to select "Internet Protocol Setup".
4.
Press the. or 'Y button to select "Auto Setup", then press the ENTER G butt
"". The Internet Protocol is set automatically.
"". Select "Access Point Select" to check the network connectivity.
(Refer to page 124)
Press the EXIT button to exit.
Manual Setup
1. Press the MENU button to display the menu.
Press the. or 'Y button to select "Setup", then press the ENTER G button.
2.
Press the. or 'Y button to select "Wireless Network Setup", then press the
ENTER G button.
3. Press the ENTER G button to select "Internet Protocol Setup".
4. Press the. or 'Y button to select "Manual Setup", then press the ENTER G
burton.
5. Press the., 'Y, .... or
~
button to move to an item, and press the numeric
button to configure the selected item. Press the ENTER G button
"". If you want to use a static IP address, refer to the user manual of your
wireless IP sharer.
"". Select "Access Point Select" to check the network connectivity. (Refer to
page 124)
Press the EXIT button to exit.