Prioris ZX 6000MP Series User Manual page 4

Server Configuration
Diagnostics
Prioris ZX 6000MP Series servers come with an advanced set of diagnostic
utilities that can be used to identify and correct problems you might encounter
when configuring or troubleshooting the server.
The diagnostics are available from:
•
The Utilities folder in the ServerWORKS Quick Launch CD-ROM disk.
Use Quick Launch to create a bootable diagnostics diskette.
•
The server's MS-DOS partition (if the partition was created during the
Quick Launch installation process). Check the DIAG subdirectory:
C:\DIAG\DIAGNOSE.BAT
Refer to the AMI Diagnostics manual for more information. This manual is
available in the ServerWORKS Quick Launch CD-ROM Documentation folder.
EPP3SMC.EXE
EPP3SMC.EXE is used to configure a server's parallel port as an enhance
parallel port (EPP). Before using EPP3SMC.EXE, check the documentation for
the device you want to connect to the parallel port and make sure it supports
EPP mode.
The EPP3SMC.EXE file is available from:
•
The ServerWORKS Quick Launch CD-ROM disk. Check the directory
tree.
•
The server's MS-DOS partition (if the partition was created during the
Quick Launch installation process). Check the EPP subdirectory:
C:\EPP\EPP3SMC.EXE.
1-4