Server Configuration
MYLEX RAID Configuration Utility
RAID-ready servers come with a factory-installed MYLEX RAID controller and a
RAID configuration utility. The RAID configuration utility is supplied on the
ServerWORKS Quick Launch CD-ROM disk. This utility appears the first time
you boot your server to allow the RAID array to be configured.
After the initial server installation, the RAID utility is available from:
•
The ServerWORKS Quick Launch CD-ROM disk. Use Quick Launch to
create a bootable RAID diskette.
•
The server's MS-DOS partition (if the partition was created during the
Quick Launch installation process). Check the following directory:
C:\RCU\RAID.BAT.
1-2