Before you Begin ... for purchasing a Digital Prioris server. The Prioris family represents Select a suitable area for assembly and use. En- Digital’s continued commitment to sure that your workspace: Uncompromising Quality, backed by Is located next to electrical outlets and a tele- award-winning Customer Service and Support.
Page 3
ServerWORKS Manager kit: ServerWORKS Server keys Manager software and documentation. Server software and documentation kits The Prioris Server documentation kit includes: SCSI cables and terminators (on some This Installation Guide, User’s Guide, Docu- configurations, these items might be installed) mentation Overview, Options Manuals, War- ranty and Service Information, Diagnostic User’s Guide, and Registration Card.
540 MB minimum hard disk drive Expanding Your Server Network card Server Utilities Two or three button mouse Also, refer to the documentation that came with the CD-ROM drive attached to the bootable SCSI option kit for specific installation instructions. controller Keyboard Prioris Servers...
Connect the cables and power cord 1. Connect the mouse and keyboard cables into NOTE the corresponding connectors at the back of the Some large screen monitors (17-inch diagonal and server. over) require more power than the server’s auxiliary 2. Place your monitor near your server. Connect ac outlet can supply.
4. Adjust the monitor contrast and brightness to obtain a readable screen display. NOTE Refer to your User’s Guide for BIOS, Power-on- self-test (POST), and OCP messages. Front panel switch icons are, from left to right, power, OCP backlight, and system reset. Prioris Servers...
Run the Quick Launch CD-ROM program 1. Locate the Quick Launch CD-ROM disk in your ServerWORKS software kit. Power on your server and insert the CD-ROM disk. Press Ctrl + Alt + Del to reboot your server. 2. When prompted, enter the MS-DOS partition size.
Page 8
If not, shut down your 3. If you installed a RAID controller, the RAID con- server, change the order of your cards and recon- figuration utility will be displayed next. Configure figure your server. your server for RAID. Prioris Servers...
Express operating system installation Express Installation Microsoft Windows NT Server & Novell NetWare You will be asked to provide the following information before you can Express install Microsoft Windows NT or Novell NetWare. Windows NT Server Novell NetWare Full Name ______________________________________ Server Name ____________________________________ Organization Name _______________________________ Organization Name _______________________________...
5. Select Conventional and then your server’s op- server. erating system. Select your server’s model name to view the list of available disk images. For more information, refer to the ServerWORKS Quick Launch Reference Guide and the on-line help in the ServerWORKS Quick Launch program. Prioris Servers...
2. Have the server’s model number and serial 2. Send in the registration card contained in your number available before you call. Prioris Server documentation kit. 3. Record any error messages and be prepared to Warranty describe the sequence of events that led to your problem.
Page 12
Obtain an easy-to-read topology map of the network Manage server fault conditions Support distributed SNMP network devices from anywhere on the LAN NOTE Refer to the ServerWORKS Manager README FIRST letter and User’s Guide in the Server- WORKS software kit for installation information. Prioris Servers...
Need help?
Do you have a question about the ZX 5000 and is the answer not in the manual?
Questions and answers