Time And Status Display - Kenmore 796.8031 Use & Care Manual

TIME AND STATUS DISPLAY

The Time and Status Display shows the estimated time
remaining, cycle progress, and vent status. When the dryer is
turned on, the display will illuminate.
B
A
ESTIMATED TIME REMAINING
When a cycle is selected, the display will indicate the
default time for that cycle. Once the cycle is started,
the estimated time will be displayed. This displayed
time may fluctuate during the cycle depending on the
conditions of the load in the dryer.
B
LINT SCREEN INDICATOR
The dryer automatically detects reduced airflow
caused by a full lint screen. The Check Lint Screen
indicator will light before each load as a reminder
to check the lint screen before starting each load for
maximum efficiency. Always clean the lint screen
before every cycle.
C
CYCLE STATUS INDICATOR
This portion of the display shows which stage
of the drying cycle is currently underway
(DRY, COOLING, or WRINKLE GUARD).
HOW TO USE
C
A D
22 22
E
D
CHECK VENT INDICATOR
(DUCT BLOCKAGE SENSING SYSTEM)
The CHECK VENT duct blockage sensing system
detects and alerts you to blockages in the ductwork
that reduce exhaust flow from the dryer. This light
does not indicate any problems with your dryer. If this
light blinks, it indicates that your home's exhaust sys-
tem has a serious restriction, which is not covered by
your dryer's warranty. Call Sears duct cleaning ser-
vice to set up an appointment to have your exhaust
system serviced.
E
CONTROL LOCK INDICATOR
When Control Lock is set, the Control Lock indicator
will appear and all buttons are disabled. This pre-
vents children from changing settings while the dryer
is operating.