WLAN Settings
Wi-Fi Menu lists
• Refresh: Refresh the scanned AP
• Detail: Detail information of selected AP
• Profile add: Add new profile.
• Delete: Delete selected item ( It displays on the menu when you select the registered AP list )
• View registered: See registered Access Point ( It displays on the menu when you select the registered AP list )
• Change touch: It shows the Access Point that you searched as icons. And you can drag the icon to connect access point.
Wi-Fi Settings.
There are 3 ways to register an AP
1. Add profile from Menu
Select
menu > Profile add
SSID setting : Enter SSID name
Security setting : You can configure security to use.
Networking setting : You can set Network DHCP or manually
2. Add profile from AP list
Select
add
SSID setting : SSID will set automatically.
Security setting : You can configure the security to use
Networking setting : You can set Network DHCP or manually
3. Add profile as Temporary
Select OK or Temp
Security setting : You can configure the security to use
Networking setting: You can set the Network DHCP manually
33
If you add a profile as <Temp>,
it means it is connected as
temporary so you should
connect to the AP manually
every time when you connect
to the AP if it is not registered