Table of Contents
Advertisement
6. Serial ATA connectors (7-pin SATA1, SATA2)
These next generation connectors support the thin Serial ATA cables
for Serial ATA hard disks. The current Serial ATA interface allows up to
150MB/s data transfer rate, faster than the standard parallel ATA with
133MB/s (Ultra ATA/133).
If you installed Serial ATA hard disk drives and Windows
system, you can create a RAID 0 or RAID 1 configuration using the
Adaptec HostRAID technology embedded in the Intel
PSCH-SR SATA Connectors
Important notes on Serial ATA
•
•
2-26
®
PSCH-SR
In a legacy operating system (DOS) environment, using the Serial
ATA connectors will disable the Southbridge support to one of the
IDE channels (either primary or secondary channel).
The Serial ATA RAID feature (RAID 0 and RAID 1) is only available
®
under Windows
XP.
SATA2
SATA1
Chapter 2: Hardware information
®
XP operating
®
6300ESB.
Advertisement
Table of Contents
