Download Print this page

Automatic Operation - Hitachi RAS-DX10HDK Instruction Manual

Indoor/outdoor unit

Advertisement

ATTACHING AND REMOVING FRONT PANEL
RECEIVABLE INDICATOR FUNCTIONS
TIMER LAMP (Orange)
This lamp lights when the
timer is working.
CAUTION
Turn off the circuit breaker or pull out
the power plug if the unit is not be
operated for a long period.

AUTOMATIC OPERATION

• Performs heating operation when the room temperature is below 23°C.
Heating
Set the temperature to be around 23°C.
• Performs dehumidifying operation when the room temperature is 23~27°C.
Dehumidifying
The preset temperature will be the room temperature at the time of start of air conditioner
operation.
• Performs cooling operation when the room temperature is above 27°C.
Cooling
Set the temperature to be around 27°C.
While gripping both the left and right hand edges
[recessed in the front housing] of the front panel,
lift up to open the front panel.
After completion of job, slightly lift up the front
panel and pull down to close the front panel. Ensure
that the 3 sets of left, centre and right clips are
fully secured.
OPERATION LAMP (Yellow)
This lamp lights during operation.
TEMPORARY SWITCH
– 5 –

Advertisement

loading

This manual is also suitable for:

Ras-dx13hdkRac-dx10hdkRac-dx13hdk