. For PLATE WARMER cycle:
a. Load clean plates and dishes to
b. Select HEATED DRYING
c. Leave the door unlatched.
/ RINSE& HOLO
clockwise to PLATE WARMER
e. Latch the door to start the cycle.
What Happens in ~ch Cycle
You'll hear occasional clicking
—Soft food disposer shredding
—Drain valve opening to pump
—Timer control as cycle
—Detergent cup opening.
HEATED DRYING: Available on all wash cycles except RINSE HOLD.
Add 29 minutes to wash cycle time.
ENERGY SAVER—Drying heater is turned off. Dishes dry naturally.
Cycle Selection Hin@
It is important to follow the loading
instructions on pages 8 and 9.
as pots, pans and casseroles with
dried-on or baked-on soils. Every
day dishes may be included.
NORMAL WASH—For most loads
of everyday dishes, glasses and
cookware with medium soils.
LIGHT WASH—For dishes that
have been pre-rinsed before
loading. Also, for washing ve~
lightly soiled dishes with soils that
have not dried on.
The motor stops during drying.
Water vapor comes through the
vent under the door latch during
drying and when water is being
RINSE HOLD—For rinsing partial
loads which will be washed later.
Select ENERGY SAVER drying
option. Do not use detergent.
PLATE WARMER–For warming
clean dishes and serving plates for
the serving of hot food.