Window Requirements - GE APV04 Use And Care & Installation Manual

BEFORE YOU BEGIM
Read these instruction completely and carefully.
ordinances.
with the Consumer.
CONSUMER—Keep these instructions for future
reference.
ELECTRICAL REQUIREMENTS
FOR PERSONAL SAFETY:
. This appliance must be properly grounded.
See page 3.
. D
O
remove the third grounding prong from the
power cord.
. We recommend that you do not use an
extension cord or an adapter plug with this
appliance.
change the plug on the power cord of
this appliance.
codes and ordinances.
This
appliance must be supplied with 115V,
and connected to a properly grounded
branch circuit, protected by a 15 or 20 amp
circuit breaker or time-delay fuse.
. If the electric supply provided does not meet the
above specifications, call a licensed electrician.
problems—consult a qualified electrician.
SAVE THE CARTON
For convenient storage of air conditioner during
winter months or when not in use.
Phillips screwdriver
Flat Blade screwdriver
Knife or Scissors
Ruler

WINDOW REQUIREMENTS

22 x"
opening width of
opening of 14
bottom of sash to stool.
. Install the air conditioner in a window
there will be enough clearance around the cabinet
to allow ample circulation of air through the unit.
4
22
min.
Note: All
supporting parts should be
secured to firm wood, masonry or metal.
Raise the window sash and remove the handle.
Measure the window sill, side-to-side, and mark
a center line. Secure the locator on the center of
the window sill with the edge against the stool,
using two 1" long screws.
Center
window with actual
to
minimum from
where
36"
to
stool
Line
Wall
7