Dell PowerEdge C8000 Getting Started page 6

1 Pull on the latch release buttons on the end piece midpoints to open the
rail latches on the front end of the rails ‚.
2 Align the end pieces of the rails on the vertical rack flanges to seat the pegs
in the bottom hole of the first U and the top hole of the second U —.
Engage the back end of the rail until the latch locks in place ˜.
3 Pull on the latch release buttons on the end piece midpoints to open the
rail latches on the back end of the rails ™.
4 Align the end pieces of the rails on the vertical rack flanges to seat the pegs
in the bottom hole of the first U and the top hole of the second U †.
Engage the back end of the rail until the latch locks in place.
5 Secure the end pieces of the rails to the left and right rack posts with two
10-32 screws ›.
NOTE:
The rails can be used in both square-hole and round-hole racks.
4
Getting Started With Your System