Philips 170C8FS/00 Service Manual page 58

58 HUDSON 8
2.2 Scanning frequencies
H-Frequency.
V-Frequency.
2.3 Video dot rate.
2.4 Power input.
2.5 Power consumption.
2.6 Dimensions.
2.7 Weight.
2.8 Functions:
(1) D-Sub analog R/G/B separate inputs, H/V sync separated, Composite (H+V) TTL level, SOG sync.
(2) DVI-D digital Panel Link TMDS input
Ambient temperature: 0 °C - 40 °C
2.9
2.10 Regulatory compliance:
Safety
EMI
Ergonomics
Compatibility
3.0 Electrical characteristics
3.1 Interface signals
There are two main display interface input signals (D-sub and DVI-D)
1). D-shell Analog
Input signal: Video, H-sync, V-sync,
Video: 0.7 V p-p, input impedance, 75 ohm
Sync. : Separate sync
2). DVI-D Digital
Input signal: Single TMDS link (Three channels: RX0-/+, RX1-/+, RX2-/+)
3.2 Interface
3.2.1 D-Sub Cable
Length.
Connector type.
2007-06-01
GENERAL PRODUCT SPECIFICATION(Continued)
: < 140 MHz
: 90-264 V AC, 50/60 ± 2 Hz
: < 36 W maximum
:
:
B, CCIB / CCEE(China), CE(Europe), CSA(Canada), DEMKO(Nordic),
EZU(Czech), FIMKO(Nordic), Gost(Russia), IEC 950 CB Report, NOM
NYCE(Mexico), PSB(Singapore), SEMKO(Nordic),SISIR CPA(Singapore),
TUV(Germany), UL(USA),
* UL2601-1(NAFTA), EN60601(EU) and IEC60601-1(WW)
C-tick, CE(Europe), FCC(USA), IC(Canada), VCCI(Japan),BSMI,
*IEC60601-1-2 (EU)
E2000, MPRII(Sweden), Nutek(Sweden), TCO99, TCO03, TUV/GS, TUV/ERG,
EPA, ISO13406-2
PC2001, Windows 2000, Windows 98/Me, Windows XP, NSTL
* Medical compliance only applies for dedicated models
TTL level, input impedance 2k2 ohm terminate
H-sync Positive/Negative
V-sync Positive/Negative
Composite sync TTL level, input impedance 2k2 ohm terminate
(Positive/Negative)
Sync on green video 0.3V p-p Negative. (Video 0.7 V p-p Positive)
: 1.8 M +/- 50 mm
: D-Sub male with DDC-2B pin assignments.
Blue connector thumb-operated jackscrews
17 inch LCD Monitor
TYPE : 170C8FS/00
BRAND : PHILIPS
2007-06-01
: 30K – 83 KHz
: 56 - 76 Hz
8670 000 25561
590 4
19