Panasonic CQC5303 Manual page 15

Sirius Satellite Radio Control
E
N
G
L
I
S
H
15
[VOLUME] (PUSH SEL: select)
Channel Preset
Up to 6 channels can be stored in each of the SR1, SR2
and SR3 band selections.
With this operation, a channel can be manually stored in
the preset memory.
q Select a band and channel.
w Press and hold one of the preset buttons from [1] to [6]
until the display blinks once.
Note:
¡ New channels overwrite existing saved channel after
this procedure.
Preset Channel Calling
q Select a band.
(a
w Press one of the preset buttons from [1] to [6].
Note:
¡ Because preset memory setting is performed with
Service IDs in each channel, a channel may switch to
another that has been stored under the same Service
IDs when calling up a preset channel. However, broad-
casting contents are the same as what the stored chan-
nel provides.
16
Preset Buttons [1] to [6] (Preset station)
(a Previous page)
Previous page)
(continued)
[D] (DISP) (Return to the regular mode)
Category Setting
Press and hold [BAND] for more than 2 seconds to
switch category mode ON or OFF.
∞≈≈£
(Category mode ON)
appears at category mode ON
£≈≈£
(Category mode ON)
appears at category mode ON
¡ Enables category switching.
¡ Enables channel selection only within the catego-
ry selected by category switching.
Category Selection
q Press [}] or [{] to display the category name.
(CAT ON)
w Press [}] or [{] while the category name is dis-
played to select a category. Seeking will start.
Direct Channel Selection
(Only for remote control unit)
Example: Channel number 5
q Press [#].
w Press [5]
e Press [BAND] (SET).
Note:
¡ The previous screen reappears if a nonexistent channel
is selected.
¡ "INVALID CHANNEL" is displayed and the previous
screen reappears in a few seconds if an off-the-air chan-
nel is selected.
[}] [{]
(Category selection/parental
lock setting)
[]] [[]
(Parental lock setting)
[BAND] (SET)
(Category selection/parental
lock setting)