5. DO NOT immerse the heater in water.
6. Wait until the unit is completely dry before use.
7. Air filter needs cleaning after used 3 months of use. Please take off the filter with the 2
steps in the drawing below. Flush and clean the filter with water, Then, dry it out and re-
assemble.
The unit
8. If you do not use the heater for a long time, please take out the remote batteries (to prevent
corrosion ) as shown below. Store the remote in a safe place.
PUSH
lid
STORAGE
Store the heater in a cool, dry location when not in use. To prevent dust and dirt build-up, use the
original packaging to repack the unit.
2) Remove Air filter
1) Remove bracket screws (4X)
Battery
9