Table of Contents
Advertisement
2、Setting Desired Temperature
Or
3、Setting flame
Or
4、Setting the POWER OFF TIMER Function
Note: The Power-Off-Timer Function will allow for the heater to power OFF after a
certain set time, and can only be set while the heater's display is in the "On" position.
Or
Power for heat-up mode is 1500W; heat-down is 750W,and
turn off the heat.
Adjust the desired temperature by pressing the Up/Down
arrows on the con trol panel or remote control.
Desired temperature options vary from 59℉ to 95℉. Once
you have chosen the desired temperature, the heater will
remain on until the room temperature increases to the
temperature on the digital display. The heater will cycle on
and off to maintain the desired room temperature.
Adjust the brightness of the flame and turn off.
Turn the heater to the "On" position .Press the Timer
button on the heater's control panel or the remote.
The digital display changes from the "temperature" to the
"hours" option for the timer. Continue to press the timer
button to change the number of hours you would like the
heater to run before powering itself off .The hour options
for the timer are from 0 to 12 hrs. (in 1 hr increments).
The selected hour increments will flash for a few seconds,
then revert back to the set desired temperature .The Timer
indicator light will remain lit as long as the Timer is set.
The heater will power OFF when the internal heater clock
counts down the hour increments you set.
7
Hide quick links:
Advertisement
Table of Contents
