Controller Specification; Electrical Specification - Samsung ML-3561N Service Manual

Specifications

3.2 Controller Specification

ITEM
Processor(CPU)
Memory
Emulation
Interface
Interface switching
Interface time-out
Font

3.3 Electrical Specification

ITEM
Input Voltage
Power Consumption
3.4 TONER Cartridge (Developer)
ITEM
Life span
Developing
Charging
Toner supply Method
Toner checking sensor
Ozone
Style
Service Manual
3-2
SPGPv3 400Mhz
NAND FLASH 32MB
RAM : 32MB
Option DIMM module : 32, 64, 128, 256MB (SDRAM)
100Pin SDRAM DIMM (Use only Samsung Memory Parts made specifically for this printer.)
EEPROM(NVRAM) : 4Kbyte
PCL6 : Win9x/ME/NT4.0/2000/XP
Postscript Level3 : MAC OS 8.6 ~ 9.2/10.1 ~ 10.3
PCL5e : Various Linux OS including Red Hat, Caldera, Debian, Mandrake, Slackware,
SuSE and Turbo Linux
Parallel : IEEE 1284 Bidirectional Parallel
- Modes supported : Compatible,Nibble,Byte,ECP
USB(without HUB mode)
-USB 2.0 compliant
Network Interface : - 10/100 Base TX
- 802.11b Wireless LAN
Automatic
999 seconds
45 Scalable Font , 1 Bitmap Font ,Postscript 3 internal font 136
DESCRIPTION
Nominal input voltage
Input voltage range
Nominal frequency
Frequency tolerance
Printing : 600W(average)
Sleep : under 12W
DESCRIPTION
Starter: Up to 6,000 pages
Replacement : Up to 12,000 pages
Non Contact Developing
Conductive Roller Charging
Not possible, replace the whole print cartridge.
Fitted
0.1PPM or less
Single cartridge
DESCRIPTION
-High Speed
220-240 VAC / 110~127VAC
198-254 VAC/ 99~135VAC
50/60 MHz
+3Hz
A4 Size, @ISO 5% Coverage, SIMPLEX
REMARK
REMARK
Samsung Electronics