Aiwa 6ZG-1 Service Manual page 5

4. How to reassemble the TURN TABLE. (Fig-7)
1) Push LEVER TT in the direction of "C", and put in the
TURN TABLE 5CD. (Fig-7)
After reassembly, one of the TURN TABLE DISC
TRAY (can be either one of the five disc trays) must be
aligned with TURN TABLE 5CD. (Fig-8)
That is, having no gap difference between the TURN
TABLE 5CD and the TRAY 5CD.
* When reassembling the TURN TABLE 5CD, it is
acceptable facing any CD number (1-5).
C
LEVER TT
Fig-7
TURN TABLE 5CD
5
ALIGN
TRAY 5CD
Fig-8