3. HARDWARE SETUP
Motherboard Feature Settings
The motherboard's onboard functions are either adjusted through jumpers or DIP
switches. When using DIP switches, the white block represents the switch's posi-
tion. The example below shows all the switches in the OFF position.
COM1
TUSL2
TUSL2 DIP Switches
1) JumperFree™ Mode (JEN)
This jumper allows you to enable or disable the JumperFree™ mode. The
JumperFree™ mode allows processor settings to be made through the BIOS
setup (see 4.4 Advanced Menu).
NOTE: In JumperFree™ mode, all dip switches must be set to OFF.
Setting
Disable (Jumper)
Enable (JumperFree) [2-3] (default)
COM1
TUSL2
TUSL2 JumperFree™ Mode Setting
18
®
JEN
[1-2]
JEN
®
ASUS TUSL2 User's Manual
DSW
ON
OFF
1. Frequency Selection
2. Frequency Selection
3. Frequency Selection
4. Frequency Selection
5. Frequency Selection.
DSW
JEN
1 2
Disable
Jumper Mode
JumperFree Mode
OFF
2 3
Enable
(Default)