Table of Contents
Advertisement
Heater assembly
• Opening the heater (Fig.2):
1. Prise off the plastic caps and remove the
screws.
2. Pull the side panels at the front outwards and
remove them backwards.
3. Lift the top panel (A) approx. 10mm.
4. Pull the top panel forwards.
5. Lift off the top panel.
6. Pull the rear top panel (B) forwards.
7. Lift off the rear top panel.
Remove the top insulation, packaging and assem-
bly material.
• Place the heater in its final position.
Align the fixing screw in its final position on the
right or left hand inner panel and fix it firmly to the
wall.
5.
Fig.2 Opening the heater
Fig.3 Wall fixing screw
7.
B
6.
A
4.
3.
1.
2.
1.
23
Advertisement
Table of Contents
