Radio Shack PRO-2052 Owner's Manual page 22

ority channel (for up to a total of 10
stored channels). As the scanner
scans the bank, if the priority feature is
turned on, the scanner checks the pri-
ority channel for activity every 2 sec-
onds.
Changing Priority Channels
The scanner automatically desig-
nates each bank's first channel as its
priority channel. Follow these steps to
select a different channel as the priori-
ty channel for a bank.
1. Press
MANUAL
2. Enter the channel number you
want to select as the priority chan-
nel, then press
3. Hold down
scanner beeps twice.
to the right of the channel number.
4. Repeat Steps 2 and 3 for the
channel in each bank you want to
program as a priority channel.
To turn on the priority feature, press
during scanning.
PRIORITY
pears. As you scan the bank, the
scanner checks the bank's priority
22
.
again.
MANUAL
until the
PRIORITY
P appears
PRI
channel every 2 seconds in each bank
that is turned on, starting from the low-
est to the highest-numbered priority
channel.
To turn off the priority feature, press
PRIORITY
Note: The priority feature must be
turned off to use the data skip feature
(see "Skipping Data Signals" on
Page 25).
Locking Out Priority
Channels
You can lock out priority channels. If
you lock out all priority channels,
CH Loc Out
on the priority feature.
ap-
. PRI disappears.
appears when you turn
P