Jands Stage CL User Manual page 64

Setup
This item... does this...
Networ k Sets the network (Ethernet) port to either DHCP or Sta
configuratio n mode
Sets the IP address of the console, when using a static IP. If
IP Address the console is set to DHC
console has obtained from the DHCP server.
Sets the subnet mask, w
Netmask
Normally 255.255.255.0
Gateway Sets the gateway address when using a static IP address
Sets the audio sensitivity of the Stage CLs inbuilt
Audio
microphone. Increase the value to allow the mic to pickup
sensitivity
softer sounds.
Sets the audio range of the Stage CLs inbuilt microphone.
Audio
Decrease the value to make the Stage CL respond to music
Dynamics
with less dynamic range.
Adjusts the brightness of all LEDs on the front panel of the
LED Brightness
Stage CL
LCD Brightness Adjusts the brightness of the LCD touchscreen.
Date Sets the date for the consoles clock.
Time Sets the time for the consoles clock.
Locking Sets the code used
Passcode the console on page 14-3
Opens a window w
Reset Console
default settings. This option deletes
Resetting the console
You can use the Set up: Reset option to reset the console to its default settings
delete all saved show files. To do this:
1. In the Setup window select the Reset
console window:
11‐2
P this field shows the address the
hen using a static IP address.
to lock and unlock the console. See Locking
here you can reset the console to its
all show files.
option. Stage CL displays the Reset
Stage CL User Guide, Version 1.3
Setup & Preferences
tic IP
and