Patching Your Lights; Using The Patch Wizard - Jands Stage CL User Manual

Patching your lights Using the Patch wizard
4. Patching your lights
Once you've got your Stage CL system connected and powered up you can patch
up to 24 fixtures (or groups of fixtures).
In the Patch window the fixture numbers correspond to the 12 sets of fixture
controls (flash button, fader, colour controls etc) on the front of the Stage CL.
Fixture numbers 1-12 are on the first page (the Black page) and fixtures 13-24 are
on the second page (the White page). So when you are patching think about
which fader and control set you'd like to use to control each fixture or group of
fixtures.
If it's not already open click on the Patch button on the touch screen. Stage CL
displays the Patch window:
This is where you tell the Stage CL what sort or fixtures you are using and which
DMX channels each fixture is assigned to. You can either patch your fixtures one
by one or use the built in Wizard to speed things up.
Using the Patch wizard
To patch your fixtures with the wizard, tap the Patch button on the Home screen
then press the Wizard button. Stage CL displays a window explaining the steps
required to complete the Patch Wizard:
Stage CL User Guide, Version 1.3 4‐1