Asus INTEL TUSL2-C User Manual page 21

3. HARDWARE SETUP
5) Voltage I/O Setting (VIO)
This jumper sets the voltage supplied to the DRAM, chipset, AGP, and PCI. The
default setting of 3.40V should be used unless processor overclocking requires a
higher voltage.
Setting VIO
3.30 V [1-2]
3.40 V [2-3] (default)
3.60 V [3-4]
®
TUSL2-C
TUSL2-C VIO Setting
WARNING!
Using a higher voltage may help when overclocking but may result
in the shortening of your computer component's life. It is highly recommended
that you leave this setting on its default.
ASUS TUSL2-C User's Manual
VIO
1 2 2 3
3.30 V 3.40 V
(Default)
3 4
3.60 V
21