Asus INTEL TUSL2-C User Manual page 18

3. HARDWARE SETUP
Motherboard Feature Settings
The motherboard's onboard functions are either adjusted through jumpers or
DIP switches. When using DIP switches, the white block represents the switch
position. The example below shows all the switches in the OFF position.
TUSL2-C
TUSL2-C DIP Switches
1) JumperFree™ Mode (JEN)
This jumper enables or disables the JumperFree™ mode. The JumperFree™
mode allows processor settings to be made through the BIOS setup (see 4.4
Advanced Menu).
NOTE: In JumperFree™ mode, all dip switches must be set to OFF.
Setting
Disable (Jumper)
Enable (JumperFree) [2-3] (default)
TUSL2-C
TUSL2-C JumperFree™
Mode Setting
18
DSW
®
1. Frequency Selection
2. Frequency Selection
3. Frequency Selection
4. Frequency Selection
5. Frequency Selection.
JEN
[1-2]
JEN
®
Jumper Mode
ASUS TUSL2-C User's Manual
ON OFF
DSW
JEN
1 2
Disable Enable
JumperFree Mode
(Default)
OFF
2 3