Battery Installation; Charging The Sub Monitor - Panasonic VL-SWD501EX Operating Instructions Manual

3. Preparation
Icon
Out of range.
Indicates the number of the sub
monitor being used.
Indicates that the doorphone's
ringtone volume is muted.
Indicates that the camera's ringtone
volume is muted.
Indicates which doorphone is
calling, monitoring, or on a call.
("1" indicates the device number.)
Indicates which camera is calling,
monitoring, or on a call.
("1" indicates the device number.)
Indicates there is a call from the
doorphone when calling,
monitoring, or on a call with another
device. (® page 32)
Indicates there is a call from a
camera when calling, monitoring, or
on a call with another device. (®
page 32)
Indicates that "Press-to-talk" mode
is on. (® page 17)
Indicates that images are being
recorded. (® page 20)
Indicates that the doorphone's LED
lights are "On". (® page 34)
Soft key icons
Icon
Displays menus.
Executes the selected item or
operation.
Returns to the previous screen.
Unlocks the electric lock. (®
page 29)
Changes the display to zoom
display. (® page 33)
Changes the display to wide display.
(® page 33)

3.4 Battery installation

– USE ONLY rechargeable Ni-MH batteries AAA (R03)
size.
– Do NOT use Alkaline/Manganese/Ni-Cd batteries.
– Confirm correct polarities (
14
Meaning
Note:
R Use the supplied rechargeable batteries (Ni-MH
R Wipe the ends of batteries (
R Avoid touching the ends of batteries (

3.5 Charging the sub monitor

Only connect the charger with the supplied Panasonic
AC adaptor (® page 3).
Action
*1 Press plug firmly.
R Connect the charger to the power outlet, and then
R Charging may take longer in the following situations.
, ).
R The sub monitor does not overcharge even if it is
ONLY). For replacement, we recommend using the
Panasonic rechargeable batteries noted on page 4.
unit contacts.
AC adaptor connections
A
*1
B
place the sub monitor in the charger to charge it.
Charging usually takes about 8 hours.
A Charge indicator
– when charging: lights
– when charging is completed: off
B Hook
– When the operating temperature is low. (®
page 43)
– When the sub monitor is picked up off the charger
or used during charging.
– When the sub monitor's signal is out of range
( ). (® page 14)
continuously placed in the charger.
, ) with a dry cloth.
, ) or the