The Cleaning Function; When To Clean By Pyrolysis - Asko OP8651 Operating Instructions Manual

Multi-function pyrolytic oven
Table of Contents

Advertisement

The Cleaning function

Cleaning
This oven is equipped with a pyrolysis cleaning
function:
• Pyrolysis is a cleaning method during which
the oven is heated to a high temperature to
remove debris and splatter caused by spitting
and dripping food. The smoke and smells that
this produces are removed as the air passes
through a catalyst.
• It is not necessary to run the pyrolysis feature
after every use of the oven, simply when the
oven is dirty.
Thursday
19
September
Food with little spattering
Food that spatters
Food that spits badly
On your oven, the screen displays the
Biscuits, vegetables, cakes quiches,
soufflés
Meat, fish (in an open dish) stuffed
vegetables
Large pieces of meat on the spit
As a safety measure, once the temperature is
higher than normal use the door automatically
locks. You cannot unlock it even by turning the
pyrolysis feature off.

When to clean by pyrolysis?

On your oven, the screen displays the symbol
.
Your oven is equipped with a system that
indicates when it needs cleaning, and which can
be checked in the "Cleaning" option. But when
the oven is dirty, a reminder is automatically
displayed on the oven screen.
If your oven smokes when the pre-heat feature is
on or if there is a lot of smoke during a cooking
cycle run the pyrolysis cycle.
You can also use this feature if there is an
unpleasant smell of cooking when the oven is
cold.
Note
Do not wait until the oven is coated in dirt before
cleaning it.
You do not need to use pyrolysis feature
Use the pyrolysis feature after 3 oven
uses
If a lot of spitting occurs, run the pyrolys-
is feature afterwards.
27

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents