Assemble The Freezer Drawer; Adjusting The Doors - Samsung Refrigerator User Manual

ASSEMblE THE FREEZER dRAWER

To reattach the freezer drawer, assemble parts in
reverse order.

AdJuSTING THE dOORS

Now that the doors are back on the Refrigerator, you
want to make sure the Refrigerator is level so that
you can make final adjustments. If the Refrigerator
is not level, it will not be possible to get the doors
perfectly even.
Insert a flat-blade screwdriver (-) into a notch on the
left control lever, and turn it count clockwise to level
the refrigerator. (You turn the lever clockwise to lower
the refrigerator and counterclockwise to raise it.)
flat-blade control
screwdriver(-) lever
Both control levers must be touching the
floor to avoid possible personal injury or
CAUTION
property damage because of tipping.
If the right side is lower, perform the same
procedure, but with the right control lever.
MAKING MINOR AdJuSTMENTS
bETWEEN dOORS
Remember a level Refrigerator is necessary for
getting the doors perfectly even. If you need
help, review the previous section on leveling the
Refrigerator.
When the left When the
door is lower left door is
than the right higher than
door. the right
door.
1. If you open the drawer
1
hinge .
2
2. Insert the supplied hex wrench
3. Please adjust the height by turning the hex wrench
1. After adjusting the doors, please insert the
The thickness of each fastener-ring is 1mm.
AdJuSTING THE FREEZER
dRAWER lEvEl
Adjustment
part
Adjustment
part
, you can see the lower
of the lower hinge.
4
clockwise ( ) or counter-clockwise
3
( ).
1
When you turn the hex wrench counter-
clockwise( ), the door will move up.
supplied fastener-ring using a pair of pliers
5
in the gap between the hinge-grommet
the lower hinge . The number of fastener-rings
8
you'll need to insert depends on the gap.
Two fastener-rings are enclosed with the
refrigerator.
Adjustment part
into the shaft
3
2
3
4
6
and
7
Freezer drawer
_9
Setting up