Panasonic UF-5300 Operating Instructions Manual page 39

No. Parameter
51 REMOTE
DIAGNOSTIC
52 DIAGNOSTIC
PASSWORD
53 SUB-ADDRESS
PSWD
54 FAX FORWARD
56 COVER SHEET
58 LANGUAGE
63 PC-FAX RCV MODE
(For UF-6300 only)
65 PRINT COLLATION
82 QUICK MEMORY XMT
99 MEMORY SIZE
(Flash Memory)
117 MULTI STATION
(HOME)
125 CONFIRM STATIONS
Downloaded From ManualsPrinter.com Manuals
Setting
Setting
Number
1 INVALID Selecting whether or not the machine accepts to update
the firmware or Remote Diagnostics from the remote
2 VALID
station. Please ask your Panasonic Authorized Dealer for
details.
(----) Setting the password for Remote Diagnostic Mode.
Please ask your Panasonic Authorized Dealer for details.
(----) Setting a 20-digit password for secured sub-address
communication.
1 INVALID Selecting whether the machine performs Fax Forwarding
to the specified destination. (See page 108)
2 VALID
1 OFF Setting the home position of the Cover Sheet parameter in
the Select Mode. (See page 104)
2 ON
Selecting the language to be shown on the display and
reports.
1 PRINT Selecting how the machine will execute the received Fax
document(s). If the setting is set to either "Upload" or
2 UPLD&PRT
"Upload & Print" the machine cannot enter the Sleep Mode.
3 UPLOAD
PRINT
UPLD&PRT: Print the received document(s) and upload
UPLOAD
1 INVALID Selecting whether the machine prints out documents in
sequence. (See page 74)
2 VALID
1 INVALID Selecting whether the machine performs Quick Memory
Transmission. (See pages 49 to 52)
2 VALID
INVALID: Stores all documents into memory first before
VALID : Starts dialling the telephone number immediately
Is not available when the No.133 Job Build is set to
"2:ON".
- - Displays the memory size.
1 INVALID Set the default setting for the Multi Station function.
INVALID: The document is sent to a single destination
2 VALID
VALID : Allows sending the document to multiple
1 INVALID Set whether to confirm the destinations.
When set to Valid the document cannot be sent unless the
2 VALID
destination is confirmed.
This function also operates when the addresses are
specified with Group Dialling or Program Dialling function.
If an address has been altered (Added or removed) when
confirming addresses, address confirmation message will
appears again when transmitting the documents (Pressing
the start key).
Customizing Your Machine
Comments
: Print the received document(s).
it's file.
: Upload the received document file.
dialling the telephone number.
after storing the first page.
only.
destinations.
Continued on the next page...
39