To Send A Document With Sub-Address - Panasonic UF-5300 Operating Instructions Manual

Sub-addressing

To send a Document with Sub-address

Using One-Touch/ABBR. Number Dialling
The operation is the same as for normal dialling
1
2
3
Using Manual Number Dialling
Use
Flash/Sub-addr
1
2
3
NOTE
124
Downloaded From ManualsPrinter.com Manuals
Set document(s) face down.
Ex:
The document is stored into the memory and your
machine starts to dial the number of the station and sends
the document(s) with Sub-addressing information.
to separate the Telephone number and the Sub-address.
Set document(s) face down.
Enter the telephone number, press
enter the Sub-address (Up to 20 digits).
(Up to 36 digits including telephone number, pauses,
spaces, FLASH and Sub-address)
Ex:
Telephone number = 5551234, Sub-address =2762
Enter as:
5 5 5 1 2 3 4
Flash/Sub-addr 2 7 6 2
The document is stored into the memory and your
machine starts to dial the number of the station and sends
the document(s) with Sub-addressing information.
1. separates the Sub-address from the Telephone number and is indicated by an
Flash/Sub-addr
"s" in the display.
2. Manual Off-Hook or On-Hook Dialling cannot be used with the Sub-addressing Transmission.
3. The Sub-address is not transmitted during Manual Redial Mode.
then
Flash/Sub-addr
ENTER STATION(S)
THEN PRESS START 00%
<01>(Station name)
5551234s2762
* STORE * NO.001
PAGES=001 01%
ENTER STATION(S)
THEN PRESS START 00%
TEL. NO.
5551234s2762
* STORE * NO.001
PAGES=001 01%