Panasonic UF-5300 Operating Instructions Manual page 139

Facsimile transceiver
Hide thumbs Also See for UF-5300:
Table of Contents

Advertisement

Mode
TAM Interface Trouble
in Unattended TAM I/F
Mode (OUT Mode)
Downloaded From ManualsPrinter.com Manuals
Symptom
Cannot utilize the
This feature is not compatible. The fax machine is designed to
remote turn-on feature
answer after 8 rings if the TAM does not answer.
of the telephone
answering machine
(TAM). The fax
machine always
answers after the 8th
ring.
Fax machine will not
TAM that gives outgoing announcement only is not
start up when the
compatible. The fax machine will work with a TAM that will
telephone answering
record Incoming message (ICM).
machine is set to give
only an outgoing
message (OGM).
A beep...beep sound is
Speak a little slower between each word while recording an
recorded on the
outgoing message (OGM).
telephone answering
machine.
Fax machine starts up
Make sure the outgoing message (OGM) does not have a
in the middle of the
silent pause longer than 5 seconds.
outgoing message
even though the caller
wants to leave a voice
message.
Cannot record any
Set Fax Parameter No. 20 (SILENT DETECTION) to
incoming message
"INVALID". And, instruct the calling party to press
(ICM). The fax machine
on their touch-tone phone during the OGM to start up your fax
always starts up at the
machine remotely.
end of the OGM and
before the tape
advances to the end of
last ICM. (Your TAM
only uses a single
cassette tape to give
OGM and record ICM.)
Cannot receive from a
Set Fax Parameter No. 20 (SILENT DETECTION) to "VALID".
machine that does not
Or, Instruct the calling party to press
send CNG signal (a
tone phone during the OGM to start up your fax machine
short beep tone every
remotely.
3 seconds) after
dialling.
Cannot retrieve
Set Fax Parameter No. 20 (SILENT DETECTION) to
message from the
"INVALID".
answering machine
remotely, the fax
machine always starts
up after the command
code is entered.
Cannot receive a fax
Check your outgoing message, if it is too long, the calling fax
message, but can
machine may have timed out. Try shortening your outgoing
record voice message.
message to less than 15 seconds, or ask the calling party to
program your telephone number in their fax machine with 3
pauses and a "#" at the end. (
PAUSE #)
Troubleshooting
Cause / Action
twice on their touch-
Ex:
5551212 PAUSE PAUSE
Continued on the next page...
page
--
--
--
--
37
twice
37
37
--
139

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Uf-6300

Table of Contents