Service Remarks; Fusing Unit - Ricoh A220 Service Manual

Insert version

Hide thumbs Also See for A220:

Table of Contents

1. SERVICE REMARKS

The following remark is not written in the A175/A176/A177/A191/A192

service manual.

However, this remark has been added as a A175/A176/A177/A191/A192

copiers service remark by RTB.

5. Silicon oil may slightly soak into the surface of the hot roller during

machine storage. The silicon oil may stick to the surface of the pressure

roller when the hot roller was in contact with the pressure roller at

installation. The pressure roller may slip due to the oil because the hot

and pressure rollers are new. Therefore, the smeared image may appear

on the leading edge at about 10 mm on the 1st copy. This is because the

hot roller is rubbing the leading edge of the copy on the pressure roller.

This symptom occurs only at the 1st copy after installation. Make sample

copies and make sure that the symptom does not recur after several

copies.

1.12 OTHERS

1. This machine has re-manufactured parts, which are selected from

dis-assembled machines in the Japanese domestic field. Note that there

are old and new parts in the machine.

4-1

SERVICE REMARKS

A220

Table of Contents