TruVision DVR 44HD Quick
Start Guide
Figure 1: Back panel connections
1. Connect one audio input to RCA connector.
2. Connect to speakers for audio output.
3. Line in.
4. Connect one CCTV monitor (BNC-type
connector).
5. Connect to a RS-232 device.
6. Connect eSATA
7. Connect up to 16 analog cameras to BNC-type
connectors (depends on the recorder model).
8. Connect to an optional USB 2.0 device such as
a mouse, CD/DVD burner or HDD.
P/N 1072969-EN • REV A • ISS 14APR15
© 2015 United Technologies Corporation. Interlogix is part of UTC Building & Industrial Systems, a unit of United
Technologies Corporation. All rights reserved.
(16-channel model shown)
9. Connect to a HDTV. The HDMI connection
supports both digital audio and video.
10. Connect to a VGA monitor.
11. Connect to a network.
12. Connect up to 16 alarm inputs, such as
detectors, push buttons, etc.
13. Connect up to four alarm outputs, such as a
siren, flash, relay.
14. Connect to ground.
15. Connect a power cord to the PSU (included).
16. Power switch (on/off).