Advertisement
Available languages
Available languages
Clock Radio
InteliSet
RADIO OPERATION INSTRUCTIONS (con't.)
STORING TO THE MEMORY
1. Make sure the radio is ON and FM is selected.
2. Tune to the desired station with the TUNE UP /\ or TUNE DOWN \/.
3. Press STORE button and "P 01" will blink, indicating the memory location to store the current
listening station.
4. While "P 01 " is blinking, pressing TUNE UP /\ or TUNE DOWN \/ can change the memory
location from 1 - 20. (For example, "P 03" means the current listening station is about to be
stored into the 3rd location of the memory.
5. After deciding on the memory location, press STORE button again and the current station will
be stored in that preset location.
6. The display will return to the frequency of the stations afterwards, and after a few seconds,
the correct time shows.
RECALLING A STATION FROM THE MEMORY
1. Make sure the radio is ON and the FM is selected.
2. For Memory Mode, press MEMORY/TIME ZONE button, "P 01" will appear on the display,
and the station saved to that memory location will play.
3. While "P 01 " is showing on the display, press TUNE UP /\ or TUNE DOWN \/ to change the
memory location from 1 - 20, and the station stored in the location is tuned once the location
is changed.
4. The display will return to the frequency of the stations frequency and in a few seconds, the
correct time shows.
ANTENNA INFORMATION
FM - The FM antenna is built into the bottom of radio. If FM reception is weak try moving the
position and direction of the unit until you find the strongest signal.
USING AUX / LINE IN JACK
The InteliSet Clock Radio is equipped with AUX IN Jack to enjoy iPod, MP3 player music or other
audio source.
1. With the unit On, press the SOURCE button until the AUX indicator appears on the display.
2. Connect your iPod, MP3 player or other audio source from its earphone jack to the clock
radio AUX IN Jack with a 3.5mm Line In cable.
3. AUX indicator will illuminate when the AUX IN Jack is plugged in, and the display will
change to AUX function.
4. Press play on your iPod, MP3 or other audio player and set the player volume to maximum.
5. Adjust the InteliSet Clock Radio volume to your desired listening level.
6. When finished listening, turn off the InteliSet Clock Radio and your iPod, MP3 or other audio
player and disconnect the cable from the AUX IN jack.
NOTE: Once the AUX IN jack is plugged in the alarm sound will be buzzer sound only while the
alarm function is activated.
USB PORT FOR MOBILE CHARGING
The InteliSet Clock Radio also has a USB port for mobile charging of DC 5V, 500mA that you can
connect your mobile phone or USB device to for charging.
BLUETOOTH OPERATION
If the InteliSet Clock Radio has never been pair with a Bluetooth device before. You need to
follow the pairing instructions below to link the unit with your Bluetooth device.
1. In standby mode, press the SOURCE button to switch to Bluetooth mode, the BT indicator
LED will begin to flash. The Speaker is ready to pair with your Bluetooth device.
2. Turn on the Bluetooth function of your mobile phone or other Bluetooth enabled device and
enable the search or scan function to find the MRX MC5550.
3. Select "MRX MC5550" from the device list when it appears on your device screen. You can
directly link with your device on that time.
4. When turning on the MC5550 to use the next time, the unit will search for the last pair
device. The BT indicator will flash rapidly indicating it is searching. If the unit finds the paired
Bluetooth device, a beep is heard and the BT indicator will begin flashing and connect.
Please read these instructions completely
I'll Wake You Up
NFC CONNECT WITH BLUETOOTH
NFC, or near-field communication, is an easy and intuitive technology that allows you to use your
smartphone for automated tasks.
If your mobile device has NFC functionality, then placing your smartphone in close proximity, or in
contact with the NFC mark on top of this product will automatically establish a Bluetooth link
with your smartphone and the InteliSet Clock Radio.
NOTE: Make sure the SOURCE is set to Bluetooth before using the NFC function.
HANDSFREE OPERATION
If you receive an incoming call while streaming Bluetooth music or audio, you can press the
DIMMER/SNOOZE button to answer the call. After you have ended the call, the MC5550 will
continue Bluetooth playback.
CHANGING THE LITHIUM BATTERY
This unit is equipped with a battery back-up system in the event of a power failure. If this occurs
the clock and alarm memory continue running and when the AC power resumes, the clock will
switch back to AC power again.
NOTE: You will not see a display and alarms will not work during a power outage. The battery only
saves the correct time and alarm times in memory.
Like all batteries, eventually the built in lithium battery will need to be replaced. A number of
factors, such as, the length of time between the date the radio was manufactured and the date
you plugged it in for the first time determine the amount of time before replacement. When the
battery power drops below a certain level, the LOW BATT indicator will 'Flash'. When you see this
indicator, you should change the battery as soon as it is convenient for you to do so. To change
the battery proceed as follows:
1. Purchase a replacement
3V lithium battery wherever
batteries are sold. The correct
battery type is CR2032 or
the equivalent.
2. Remove the battery from its
package so it is ready to install.
IMPORTANT: Leave the AC adapter connected to your AC outlet. This will provide power to the
E-Z Set computer memory while the original lithium battery is removed.
3. Turn the radio face up and use a small screw driver to remove the screw securing the battery
holder to the cabinet – BE CAREFUL NOT LOSE THIS SMALL SCREW!
4. Remove the original battery from the holder and insert the new battery into the holder the
same way, observing the positive (+) direction. Slide the holder with the new battery back into
the slot in the cabinet.
5. Replace the screw that secures the battery holder in the cabinet.
6. Turn the radio right side up and confirm that the LOW BATT indicator is 'Off'.
7. Save these instructions as you will have to do this again in three to five to eight years time.
WARNING: DANGER OF EXPLOSION IF BATTERY IS INCORRECTLY REPLACED. REPLACE ONLY
WITH THE SAME OR EQUIVALENT TYPE.
RESETTING CLOCK AFTER TOTAL MEMORY LOSS
If you do not change the built in lithium battery within a reasonable period of time after you see
the LOW BATT warning indicator, the lithium battery may become exhausted and will no longer
be able to supply back up power to the InteliSet internal computer. If the unit is disconnected
from the AC outlet after the battery is exhausted, or if a power interruption occurs, the InteliSet
memory will be lost and the clock will need to be reset when the power is restored. Be sure to
install a fresh lithium battery before you reset the clock, otherwise the clock will need to be reset
each time the power is interrupted. If the lithium battery is exhausted and you experience an
interruption in the AC power supply, the clock will reset itself to its initial default setting when the
power is restored.
The initial default setting is "12:00 AM, Sunday , January 1st (1. 1), 2012". If you notice that the
time on your InteliSet clock radio is completely incorrect, and the DAY OF WEEK indicator is also
wrong, press the WEEK button to see the date. If the date display is showing "1. 1 " (January
1st), you probably experienced a total memory loss.
To reset the clock after a total memory loss, proceed as follows:
1. Follow the instructions on before operation and install a new CR2032 lithium battery in the
battery compartment.
2. Connect the InteliSet Clock Radio to your AC outlet and let the clock set itself.
User Guide
before operating this product.
MEMOREX-CE.COM
MC5550
3. Press the WEEK and TIME buttons together. The display will change from 'Time' to 'Year'.
While holding both TIME and WEEK buttons, press the TUNE UP /\ button to set the display
to the current year, then release the buttons.
4. Press the WEEK button. The display will change from 'Time' to 'Month/Date' (MM/DD). While
holding the WEEK button, press the TUNE UP /\ button to select the current Month and Date.
The DAY OF WEEK indicator will change automatically as you adjust the Month/Date settings.
When the correct Month and Date appears on the display, release the buttons.
5. Next, press the TIME button and the TUNE UP /\ button to set the display to the correct Time.
Be sure to confirm that you have set the time correctly to 'AM' or 'PM' by observing the
PM indicator.
6. After you set the Time, reconfirm that the Day and Month/Date displays are still correct and
make any final adjustments if necessary.
The InteliSet Clock Radio memory is now reset and the new lithium battery will maintain it for the
next 3 to 5 years, depending on the number and duration of the power outages you experience.
IMPORTANT NOTE: After resetting the clock, don't forget to reset your wake up times and alarm
mode settings, and sleep timer settings as well.
CARE AND MAINTENANCE
CARE OF CABINET
If the cabinet becomes dusty, wipe it with a soft cloth. If the cabinet becomes smudged or dirty,
clean it with a soft, slightly dampened cloth.
Never allow water or any liquid to get inside the unit. Never use any abrasive cleaners or cleaning
pads as these will damage the finish of your radio.
LITHIUM BATTERY PRECAUTIONS
• Dispose of the old battery properly. Do not leave it lying around where a young child or pet
could play with or swallow it. If the battery is swallowed, contact a physician immediately.
• The battery may explode if mistreated. Do not attempt to recharge it or disassemble it. Do not
dispose of the old battery in a fire.
The apparatus must not be exposed to dripping or splashing and objects filled with liquids, such
as vases, must not be placed on the apparatus.
This marking indicates that this product should not be disposed of with other
household wastes throughout the country. To prevent possible harm to the
environment or human health from uncontrolled waste disposal, recycle this unit
responsibly so as to promote the re-use of material resources. To return your used
device, please use return and collection systems or contact the retailer where the
product was purchased as they know how to safely recycle this product.
IMPORTANT NOTICE
Daylight Saving Time is NOT observed in Hawaii, American Samoa, Guam, Puerto Rico, the
Virgin Islands and in, most of Arizona, with exception of the Navajo Indian Reservation in Arizona.
Beginning in 2007, this E-Z Set Clock Radio will automatically advance by one hour at the
beginning of Daylight Saving Time on the second Sunday in March. And it will automatically return
to Standard Time on the first Sunday in November.
If you live in an area that does not observe Daylight Saving Time it will be necessary for you to
manually set the clock back one hour at the beginning of the Daylight Saving Time, and forward
one hour at the end of Daylight Saving Time.
A simple way to do this is to change the TIME ZONE setting. Set the clock to the next higher
numbered time zone at the beginning of Daylight Saving Time, and set the clock back to your
correct time zone at the end of Daylight Saving Time.
SPECIFICATIONS AND COMPATIBILITY
AUDIO
Frequency Range(FM) ....................................................................................... 87.5-108 MHz
Speaker Impedance ........................................................................................... 4Ohm x 2 pcs
GENERAL
Power Supply ............................................................................ AC 120V 60Hz switch adapter
Battery Backup .............................................................................. 3V CR2032 Lithium Battery
(Lithium battery will work for approximately 1year before needing to be replaced with new battery)
Dimensions ................................................................................. 145 (W) ×75 (D) ×80(H) mm
Weight .......................................................................................................................0.48kgs
Specifications are subject to change without notice.
LOCATION OF CONTROLS
25
6
7
5
4
1
2
12
13
14
15
21
22
23
24
1. POWER Button
14. FM Indicator
2. SNOOZE/ON/OFF/DIMMER Button
15. DAY of WEEK Indicator
3. Bluetooth SOURCE Button
16. AUX Indicator
4. VOLUME + / – Buttons
17. MIC hole
5. TIME Button
18. Bluetooth Indicator
6. WEEK Button
19. MHz Indicator
7. YEAR Button
20. LOW BATTERY Indicator
8. TUNE/SET DOWN \/ and UP /\ Buttons
21. DC JACK Input
9. MEMORY/TIME ZONE Button
22. AUX IN Jack
10. STORE Button
23. USB CHARGING Port
11. SLEEP Button
24. BACKUP BATTERY Compartment
12. ALARM 1 Radio/Buzzer Indicators
(located on back of unit)
13. ALARM 2 Radio/Buzzer Indicators
25. NFC Touchpoint
LIMITED WARRANTY
MEM-CE, LLC. warrants this product against defects for 90 days from the date of original purchase. MEM-CE,
LLC. shall not be responsible for any lost data or other incidental or consequential damages related to this
product. Some jurisdictions do not allow limitations on how long an implied warranty lasts, or the exclusion or
limitation of incidental or consequential damages, so the above limitations or exclusions may not apply to you.
This limited warranty gives you specic legal rights, and you may have other rights which may vary from one
state, province or country to another.
PLEASE KEEP ALL PACKAGING MATERIAL FOR AT LEAST 90 DAYS IN CASE YOU NEED TO RETURN THIS
PRODUCT TO YOUR PLACE OF PURCHASE OR MEM-CE, LLC.
FOR ADDITIONAL SET-UP OR OPERATING ASSISTANCE, PLEASE VISIT OUR WEBSITE AT:
WWW.MEMOREX-CE.COM OR CONTACT CUSTOMER SERVICE: For customers calling within the
United States and Canada, call 1-877-363-6673
MEM-CE, LLC. 11485 Valley View Road, Eden Prairie, MN 55344 USA MEMOREX-CE.COM
Memorex and the Memorex logo are trademarks of Imation Corp and its affiliates. The Bluetooth
®
word mark and logos are
registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Imation Corp is under license. All other
trademarks are the property of their respective owners.
11
10
9
8
3
16
17
18
19
20
Hide quick links:
Advertisement
