Menu Items; Sub-Menu Items; Configuration Fields; Pop-Up Window - Asus K8N User Manual

2.2.4 Menu items

The highlighted item on the menu bar
displays the specific items for that menu. For
example, selecting Main shows the Main
menu items.
The other items (Advanced, Power, Boot,
and Exit) on the menu bar have their
respective menu items.

2.2.5 Sub-menu items

An item with a sub-menu on any menu screen is distinguished by a solid triangle
before the item. To display the sub-menu, select the item and press <Enter>.

2.2.6 Configuration fields

These fields show the values for the menu items. If an item is user-configurable,
you may change the value of the field opposite the item. You can not select an item
that is not user-configurable.
A configurable field is enclosed in brackets, and is highlighted when selected. To
change the value of a field, select it then press <Enter> to display a list of options.
Refer to "2.2.7 Pop-up window."

2.2.7 Pop-up window

Select a menu item then press <Enter> to display a pop-up window with the
configuration options for that item.

2.2.8 Scroll bar

A scroll bar appears on the right side of a
menu screen when there are items that do
not fit on the screen. Press
Down arrow keys or PageUp/PageDown
keys to display the other items on the
screen.

2.2.9 General help

At the top right corner of the menu screen is a brief description of the selected
item.
2-10
System Time
System Date
Legacy Diskette A
Language
Primary IDE Master
Primary IDE Slave
Secondary IDE Master
Secondary IDE Slave
System Information
Main menu items
Advanced Chipset settings
WARNING: Setting wrong values in the sections below
may cause system to malfunction.
Configure DRAM Timing by SPD
Memory Acceleration Mode
DRAM Idle Timer
DRAm Refresh Rate
Graphic Adapter Priority
Graphics Aperture Size
Spread Spectrum
Up/ ICH Delayed Transaction
MPS Revision
Pop-up window
Chapter 2: BIOS Setup
[11:51:19] Use [ENTER], [TAB]
[Thu 08/05/2003] or [SHIFT-TAB] to
[1.44M, 3.5 in] select a field.
[English]
Use [+] or [-] to
:[ST320413A] configure system time.
:[ASUS CD-S340]
:[Not Detected]
:[Not Detected]
Select Screen
Select Item
+- Change Field
Tab Select Field
F1 General Help
F10 Save and Exit
ESC Exit
[Enabled]
[Auto]
[Auto]
[Auto]
[AGP/PCI]
[ 64 MB]
[Enabled]
Select Screen
Select Item
[Enabled]
+- Change Option
F1 General Help
[1.4]
F10 Save and Exit
ESC Exit
Scroll bar