Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Black & Decker KTD222
Summary of Contents for Black & Decker KTD222
- Page 1 ® KTD222 KTD322 * the picture above may differ slightly to actual unit.
- Page 2 *Your model may be a 2 mode unit (KTD222) & as such does not have chipping function as above diagram. * the picture above may differ slightly to actual unit.
-
Page 3: Intended Use
(Original instructions) ENGLISH Technical data d. Do not abuse the cord. Never use the cord for KTD222 KTD322 carrying, pulling or unplugging the power tool. Keep Power input W 710 cord away from heat, oil, sharp edges or moving No-load speed... -
Page 4: Residual Risks
(Original instructions) ENGLISH Use clamps or another practical way to secure and sup- b. Do not use the power tool if the switch does not turn it port the workpiece to a stable platform. Holding the work on and off. Any power tool that cannot be controlled with by hand or against your body leaves it unstable and may the switch is dangerous and must be repaired. -
Page 5: Electrical Safety
(Original instructions) ENGLISH Electrical safety Selecting the operating mode (fig. B) The tool can be used in three operating modes. Press in the This tool is double insulated; therefore no earth wire button (11) and rotate the drilling mode selector (4) towards is required. -
Page 6: Switching On And Off
(Original instructions) ENGLISH Switching on and off To switch the tool on, press the variable speed switch (1). The tool speed depends on how far you press the switch. As a general rule, use low speeds for large diameter drill bits and high speeds for smaller diameter drill bits. - Page 7 KTD222 KTD322 0-1,050 0-1,050 0-5,200 0-5,200 KTD322...
- Page 9 D322...
- Page 10 KTD222 KTD322 0-1,050 0-1,050 0-5,200 0-5,200 SDS+...
- Page 12 D322...
- Page 13 KTD222 KTD322 0-1,050 0-1,050 0-5,200 0-5,200...