Specifications - Sony SRX-R210 Specifications & Features Manual

Features
• High brightness levels
SRX-R220: 14 ft-L on a 20-meter (65.6-foot) wide
screen* with an optional 4.2 kW lamp bulb
SRX-R210: Two different brightness levels can be selected
according to the screen size requirement.
·14 ft-L on a 17-meter (55.8-foot) wide
screen with an optional 3.0 kW lamp bulb
·14 ft-L on a 14-meter (45.9-foot) wide
screen with an optional 2.0 kW lamp bulb
• Outstanding resolution of 4K (4096 H x 2160 V pixels)
• Silicon X-tal Reflective Display (SXRD) imaging device
• High contrast ratio of over 2000:1
• Xenon lamp provides a highly bright and pure light source
• Optional Image Media Block (LMT-100), Screen
Management System (SMS), and Cavity Security System
(CSS) are available. These can be incorporated in the
SRX-R220 and SRX-R210 body.
• Range of lenses
• Instant recall of zoom and focus positions for
VistaVision TM and CinemaScope
Memory function
• Lens Shift function
• Color Space Conversion function
• Lamp power adjustable in 1% steps
• Keystone Masking function for standard and curved
screens
• Inputs:
RGB 4:4:4 on DC-SDI
RGB 4:4:4 on HD-SDI
Y/Pb/Pr 4:2:2 on DC-SDI
Y/Pb/Pr 4:2:2 on HD-SDI
12-bit X' Y' Z'
DVI
Two SRLV connectors for connection with Image Media
Block
• Equipped with an 8-inch exhaust duct
Sony Electronics Inc.
1 Sony Drive
Park Ridge, NJ 07656
www.sony.com/professional
V-2351
MK10385V2
TM via the Zoom/Focus

Specifications

SXRD Device Main Specifications
Display device SXRD (Silicon X-tal Reflective Display)
Size 1.55 inches, measured diagonally
Resolution (H x V) 4096 x 2160 pixels
General
Light output*
SRX-R220 14 ft-L on a 20-meter (65.6-foot) wide screen
SRX-R210 14 ft-L on a 17-meter (55.8-foot) wide screen with a
3.0 kW lamp bulb, or a 14-meter (45.9-foot) wide
screen with a 2.0 kW lamp bulb
Contrast More than 2000:1
Intra-frame contrast More than 100:1
Dimensions Approx. 29
(740 (W) x 1535 (H) x 1395 (D) mm)
Resolution 4096 x 2160 pixels (RGB)
Projection system 3-SXRD Panel Optical Prism Block System
Power requirements For lamp: 208 VAC (200-208 VAC)/3-phase,
For electric circuit: 100-240 VAC/Single-phase,
Power consumption 3-phase: 5.0 kW for lamp
(when using 4.0 kW lamp bulb)
Single-phase: 1.2 kW for electric circuit
Electric current 3-phase: 25 A (max.) Single-phase: 12 A (max.)
Operating temperature +5 to +35 °C (+41 to +90 °F)
Storage temperature -20 to +60 °C (-4 to +140 °F)
Operating humidity 35 to 85% (without condensation)
Inputs/Outputs
Input A DVI-D x1, AUX x1, up to 2048 x 1080 at 60 Hz
Input B BNC x 4, SMPTE 372M Dual-link HD-SDI (4:4:4),
SMPTE 292M HD-SDI (4:2:2), Dual-link DC-SDI
(RGB 4:4:4), DC-SDI (Y/Pb/Pr 4:2:2), 12-bit X' Y' Z'
Input C
Channel A SRLV x 1 to connect Image Media Block
Channel B SRLV x 1 to connect Image Media Block
RS-232C D-sub 9-pin x 1
Safety Interlock D-sub 15-pin x 1
Ethernet TM RJ-45 x 1, 10Base-T/100Base-TX
Others
Designed to meet DCI security requirement (SPB-2)**,
including screwless outside body and anti-tamper
sensors on all access doors.
* Measured at the center of a 2.39:1 CinemaScope-size screen, with a screen gain of 1.8.
Compliance certification process is underway.
**
© 2007 Sony Electronics Inc. All rights reserved.
Reproduction in whole or in part without permission is prohibited.
Features and specifications are subject to change without notice.
All non-metric weights and measurements are approximate.
Sony, SXRD and CineAlta 4K are trademarks of Sony.
VistaVision is a registered trademark of Paramount Pictures Corporation.
CinemaScope is a registered trademark of 20th Century Fox Film Corporation.
Ethernet is a trademark of Xerox Corporation.
1 1
/ x 60 / x 55 inches
4 2
50 Hz/60 Hz or 400 VAC (380-415 VAC)/
3-phase, 50 Hz/60 Hz
50 Hz/60 Hz
Printed in USA 3/07