Table of Contents
Advertisement
Operation
Preparing the SC600
Place the SC600 on a firm, level surface. Adjust the rubber pad legs on the bottom of the unit to
level; ensure that the SC600 is level before use. The 'bubble' level located on the top of the
SC600 can be used as an accurate level guide.
Remove the protective tape from the weight platform area and install the weight platform as
shown in the diagram using the 4 screws (supplied).
actoolsupply.com
4
actoolsupply.com
SC600‐EU‐EN v1.1 1/14
Advertisement
Table of Contents
