Pppoe/Pppoa - Draytek Vigor 110 User Manual

Below shows menu items for Internet Access:
3 . 1 . 2 P P P o E /
3 . 1 . 2 P P P o E /
PPPoA, included in RFC1483, can be operated in either Logical Link Control-Subnetwork
Access Protocol or VC-Mux mode. As a CPE device, Vigor router encapsulates the PPP
session based for transport across the ADSL loop and your ISP's Digital Subscriber Line
Access Pultiplexer (SDLAM).
To choose PPPoE or PPPoA as the accessing protocol of the internet, please select
PPPoE/PPPoA from the Internet Access menu. The following web page will be shown.
PPPoE/PPPoA Client
DSL Modem Settings
PPPoE Pass-through
12
P P P o A
P P P o A
Click Enable for activating this function. If you click Disable, this
function will be closed and all the settings that you adjusted in this
page will be invalid.
Set up the DSL parameters required by your ISP. These are vital for
building DSL connection to your ISP.
VPI - Type in the value provided by ISP.
VCI - Type in the value provided by ISP.
Encapsulating Type - Drop down the list to choose the type
provided by ISP.
Protocol - Drop down the list to choose the one provided by ISP.
If you have already used Quick Start Wizard to set the protocol,
then it is not necessary for you to change any settings in this group.
The router offers PPPoE dial-up connection. Besides, you also can
establish the PPPoE connection directly from local clients to your
Vigor110 User's Guide