Page 1
Important safety and assembly instructions Version 1.0 September 2006...
Page 2
EG540 ASSEMBLY Process of assembly Assembling the EG540 CAUTION GENERAL SAFETY REMARKS Be careful not to hurt yourself during assembly by accidentally dropping the unit. The EG540 must be assembled before use. A Phillips or slotted screwdriver is required to assemble the parts. NOTICE Make sure that the music rest is raised before CAUTION...
EG540 ASSEMBLY 10) Adjust the pedal screw underneath the pedal board until the CAUTION screw firmly touches the ground. Be careful when bringing the piano into an upright position. There is an enormous risk to overbalance For parquet or laminate floor, you may consider the unit when not handled properly, which may using felt underlays to protect the floor and ensure result in damage to the instrument, personal...