N
Before installing the cooktop, remove the protective
film.
This cooktop can be built into a working surface 20 to
40 mm thick and 600 mm deep.
To fit the cooktop into the unit make a hole of the
dimensions given in the figures below and respect the
indications given in the previous section "Technical
information for the installer".
Before installing the cooktop, remove the protective
film.
This cooktop can be built into a working surface 30 to
40 mm thick and 600 mm deep.
To fit the cooktop into the unit make a hole of the
dimensions given in the figures below and respect the
indications given in the previous section "Technical
information for the installer".
M
INSTALLATION
AKR 024 – AKR 010 – AKR 012
AKR 028 – AKR 011 – AKR 014
C
37
Y
37