Alfa Network R36 User Manual page 8

A 100BASE-TX RJ-45 port that can be attached to an
ETHERNET WAN PORT
Internet access device, such as a DSL or Cable modem.
The 3G Mobile Wireless Router has one 100BASE-TX RJ-45
ETHERNET LAN PORT
port that can be attached directly to a PC or 10BASE-T/100BASE-TX LAN
segments. This port supports automatic MDI/MDI-X operation, so you can use
straight-through cables for all network connections to PCs, switches, or hubs.
Supports connection to a wireless cellular 3G
3G & USB Wireless Card USB PORT
or USB Wireless Card for broadband Internet access.
POWER CONNECTOR The 3G Mobile Wireless Router must be powered with its
supplied power adapter. Failure to do so results in voiding of any warrantly
supplied with the product. The power adapter automatically adjusts to any
voltage between 100~240 volts at 50 or 60 Hz, and supplies 12 volts DC power to
the unit. No voltage range settings are required.
Press the WPS button to automatically configure the 3G Mobile
WPS BUTTON
Wireless Router with other WPS devices in the WLAN.
The Reset button is used to restore the factory default
REST BUTTON
configuration. If you hold down the button for 5 seconds or more, any
configuration changes you may have made are removed, and the factory default
configuration is restored to the 3G Mobile Wireless Router.
8