◆
Budget Control — Enables a monthly limit on time or total data. (Default:
Disabled)
If the Budget Control has been enabled,
◆
Budget Criterion — Specifies budget limits set by time or data.
Time Budget — Specify the amount of time (in hours) that can beused for the 3G
■
connection per month. (Range: 1~999 hours;
Default: 1 hour)
Data Budget — Specify how much Download/Upload data (in MBytes) is allowed
■
per month for the 3G connection. The drop-down list specifies if the data budget
is for download, upload, or download and upload. (Range: 3~4000 MBytes;
Default: 3 MBytes)
◆
Budget Policy — Specifies the action to take when budget limits have been
reached.
Action if Over Budget — Specifies the the action to take when a budget limit has
■
been exceeded:
Drop Current Connection — Immediately drop the current connection. (Default:
■
Enabled)
Disallow New Connection — Do not permit any new connections. (Default: Enabled)
■
Trigger by Limit Budget — Specifies the percentage of the time or data budget at
■
which to start sending E-mail alerts at the indicated time interval. When E-mail
alerts are enabled, be sure to configure the E-mail settings. (Default: 90% of
budget, E-mail Alerts disabled, recurring every 10 minutes)
E-mail Settings — The unit can use SMTP (Simple Mail Transfer Protocol) to
◆
send E-mail messages when triggered by the specified budget policy limits.
Mail SMTP Authentication — Specifies a user name and password for SMTP
23
■