Wireless Communication Settings For The Tablet - Elmo CRA-1 User Manual

Wireless Communication Settings for the Tablet

If the "Status LED" flashes and communication is not performed when you press the power
button, use the "Wireless settings buttons" on the tablet underside and wireless adapter to
perform the wireless settings.
Turn ON the tablet's power, and
press the "Wireless settings button"
on the underside.
The "Status LED" flashes at high
speed.
Press the "Wireless settings button"
on the wireless adapter.
The "Status LED" on the tablet turns
off for a few seconds.
When the "Status LED" turns off, the
Tablet and wireless adapter can
communicate, and the Tablet can be
used.
Perform the wireless setting within 30 seconds of pressing the "Wireless
settings button" on the underside of the tablet.
Caution
Press the "Wireless settings button" while supporting the body of the wireless
adapter.
Communication with the wireless adapter may become unstable if the Tablet is
used as follows.
Caution
・There is an obstruction between the Tablet and wireless adapter.
・The Tablet is placed on top of a computer.
・A wireless device or electronic equipment is being used nearby.
・The Tablet is moved quickly while being used.
Also, due to the inherent characteristics of wireless communication, the
communication may become unstable depending on the position of the Tablet
and the wireless adapter.
↓
↓
↓
79
Tablet underside Wireless adapter