Advertisement
Crossbar
Inside Holes
3
• Turn the seat assembly upright.
• At an angle, first insert one end of the crossbar into the groove
in the side rail, as shown.
• Then, insert the other end of the crossbar into the groove in the
other side rail.
• Insert two M6-1 x 15mm screws into the inside holes in each
side rail and tighten with the Allen wrench.
Hint: You may need to push both side rails together to align the
holes in each end of the crossbar and the side rails.
Assembly
Outside Holes
4
• Insert two 8mm x 27mm screws into the outside holes in the
side rails and tighten with the Allen wrench.
Foot Tube
5
• Fit the soothing unit onto the foot tube, as shown.
• Insert two 3.5 mm x 32 mm screws into the foot tube.
Tighten the screws with the Allen wrench.
4
Soothing Unit
Advertisement
